UPES-ECS ERT & Fixed-Device SIP Setup Guide¶
For Emergency Response Team members, control-room staff, and fixed campus devices (desk phones, medical/security phones, IP speakers).
ERT members should have two ways to answer: a fixed desk phone in UPES-ERT-ROOM and a mobile SIP app — so a dead battery never means a missed emergency.
Part 1 — ERT member (mobile app)¶
Same as the student guide, but with the ERT profile (your SAP ID stays your number).
App : Linphone (Android/iOS) or MicroSIP (Windows desk)
Username : <your SAP ID>
Password : <your UPES-ECS ERT password>
Domain : pbx.upes.lan (or IP from IT)
Display name : Your Name → shows as "Name - SAP ID" on caller ID
Profile : UPES-ECS ERT Profile (your account is placed in ctx_ert)
Your role/context — not your number — is what lets you receive the 111 queue. IT sets this in FreePBX; you don't configure it yourself.
Part 2 — Fixed devices (role/location answer points)¶
A "fixed device" is defined by its extension + role + location (4xxx), not by the hardware. It is provisioned by IT with a fixed 4xxx extension, not a SAP ID.
Hardware — Phase 1 = dedicated Android phone (Linphone); IP phones later. For now, each fixed answer point (ERT Lead 4101, Medical 4200, Security 4300) is a dedicated Android phone logged in as its 4xxx extension. When IP phones arrive, provision the same extension on the IP phone and retire the Android — no config change. An Android used as an answer point must be: - dedicated to that role (not someone's personal phone), - kept on the charger, always powered, - battery-optimization OFF / Unrestricted, auto-start ON (see doc 24), - ideally screen-lock disabled or set to stay awake while charging,
otherwise it will deregister and miss incoming emergency calls.
Extension : 4000-4999 range (see Numbering Plan)
Username : the fixed extension (e.g. 4300)
Password : strong random per device
Display name : Location-Role-Extension e.g. Security-Control-4300
Context : ctx_fixed_device (or ctx_ert for ERT desks)
Hardware : Phase 1 = dedicated Android + Linphone; later = IP phone (same extension)
Static IP : recommended (set when on IP phones; for Android, DHCP reservation)
Key fixed extensions:
| Ext | Device | Caller ID shows |
|---|---|---|
| 4101 | ERT Lead position | ERT-Lead · ctx_ert_lead |
| 4110–411x | ERT Operator positions (answer 111 queue) | ERT-Desk-1… · ctx_ert |
| 4200 | Medical position (dispatch target) | Medical-1 · ctx_responder |
| 4300 | Security position (dispatch target) | Security-Control · ctx_responder |
| 47xx | IP speakers / gate phones (fixed) | zone/location · ctx_fixed_device |
Positions vs fixed devices: 4101–4699 are responder positions staffed by shift
(SOP 30) — ERT positions answer the 111 queue, the rest
(ctx_responder) are dispatch targets. 4700–4799 are true fixed devices (a speaker
only receives paging; a gate phone only calls 111 + selected security/ERT).
Part 3 — Joining the emergency queue¶
- ERT devices are added to
ert_emergency_queuein FreePBX (both desk phones and ERT mobile apps). - Strategy = ring all available; busy/paused/offline are skipped.
- Healthy queue = at least 2 available responders. Below that, tell the ERT Lead.
Pause / resume yourself (e.g. stepping away from the desk):
Pausing only affects queue calls — you can still be dialed directly and can still join conferences. Confirm the prompt to avoid accidental pause.
Part 4 — Answering a 111 call¶
- Your device rings with caller ID:
EMERGENCY 111 - Name - SAP ID. - Answer and use the opening line from the ERT SOP:
"UPES Emergency Response, this is [name]. What is your emergency and where are you located?"
- Recording is already running (started the moment the caller dialed 111).
- Classify → decide dispatch mode → keep incident ownership → log.
Full call handling is in 02-ERT-SOP.md — keep it open at your desk.
Part 5 — Dispatch, paging, conference (quick reference)¶
| Action | How | Restriction |
|---|---|---|
| Warm transfer | Hold caller → call target → confirm → transfer | ERT Operators / Lead |
| Three-way bridge | Bring responder into the live call, you stay on | Lead / trained Operators |
| Paging a zone | Dial the zone code 700–705 and speak live |
Lead / Control Room; 700 needs PIN |
| Open Command Room | Dial 9000 + PIN | Emergency roles only; recorded when active |
| Reach Medical / Security | Dial 4200 / 4300 | ERT roles |
Never use blind transfer as the normal workflow — the caller can get lost and you lose ownership.
Part 6 — Daily readiness (start of shift)¶
- [ ] Your desk phone and mobile app show Registered.
- [ ] Queue shows ≥ 2 available responders.
- [ ] A 199 test call rings your device and records.
- [ ] Medical
4200and Security4300are registered. - [ ] Health Dashboard = OK; storage not full.
If anything fails → tell the ERT Lead / IT before relying on the system. A failed 111/199 test is a critical, do-not-go-live condition.
Part 7 — If a device is lost or compromised¶
Report to IT/helpdesk immediately. They will reset the SIP credential, force re-provision, and log the event. For fixed devices, disabling requires IT Admin / ERT Lead approval and the location/owner record is updated.
Emergency answering is a duty — keep at least one of your two devices registered at all times.