Skip to content

UPES-ECS × Juniper — Complete Feature Catalogue (the full menu)

Volume II — the exhaustive enumeration. Where Docs/Juniper-Integration-Plan.md is the curated plan (top ideas, tiered by impact), this document is the complete menu: every Juniper feature on your three device types that could plausibly be switched on, graded for the air-gap, and mapped to the emergency-calling system. Use it to pick — nothing here is prescriptive on its own.

Your hardware: 1× SRX300/320 · 2× EX2300-C-12P · 2× Mist AP32 · fully air-gapped (no Internet at runtime; APs commissioned once via Mist then run on config persistence).

How to read this

Every row is: feature → Junos/Mist config family → supported on your model? → works on the air-gapped LAN? → one-line emergency relevance. Grading legend:

Grade Meaning
🟢 yes Runs entirely on-box / against on-prem servers. No cloud, ever. The backbone.
🟡 persisted Authored in Mist cloud once (bench), then held by config-persistence and enforced locally offline.
🟠 local-collector Works offline only if you run the receiver (syslog/sFlow/RADIUS/NTP) on the LAN — which we do (the VM/Jetson).
🔴 needs-cloud Requires live cloud (Mist) or a subscription feed. Commissioning-time / Option-B only. 111 never depends on these.
⛔ needs-2nd-unit / n-a Needs hardware you don't have (2nd SRX, Mist Edge) or isn't on this model.

Licensing note (EX): several EX L3/multicast features need the EFL/AFL entitlement (OSPF, VRRP, PIM/IGMP-routing, RPM, BFD, RIPng). These are honour-based, work fully offline (no call-home). Buy the entitlement; no Internet needed to use it.

Jump to: Part A — EX2300-C · Part B — SRX300/320 · Part C — AP32 · Part D — Automation & telemetry · Part E — New emergency integrations this research surfaced · Part F — Recommended air-gapped feature set · Part G — Skip list, hard limits & unlock-upgrades


Part A — EX2300-C-12P (the switch)

The programmable heart of the design: 12× 1G PoE+ (124 W), 2× SFP+, 8 CoS queues, Junos ELS.

A1 · Layer 2 switching

Feature Config family On EX2300-C? Air-gap Emergency relevance
802.1Q VLANs (4093 cfg / 2044 active) vlans yes 🟢 Separate voice / ERT / softphone-Wi-Fi / mgmt
Voice VLAN (auto) switch-options voip yes 🟢 Auto-place IP phones + apply CoS
MAC-based VLAN switch-options/vlans yes 🟢 Dynamic phone→voice-VLAN by MAC
Private VLAN / port isolation vlans … no-local-switching yes 🟢 Phones reach only gateway/PBX, not each other
Q-in-Q / 802.1ad input/output-vlan-map yes 🟢 Transport stacking (rarely needed)
L2 Protocol Tunneling protocols layer2-control yes 🟢 Tunnel STP/LLDP across a provider VLAN
RSTP / MSTP (64) / VSTP (253) / STP protocols {rstp,mstp,vstp,stp} yes 🟢 Loop-free edge; fast reconverge
Redundant Trunk Group (RTG) switch-options redundant-trunk-group yes 🟢 STP-free sub-second uplink failover for signaling
LAG / LACP (128 groups, cross-member) interfaces aeX yes 🟢 Bonded, member-resilient uplink to PBX/core
LLDP protocols lldp yes 🟢 Discover phones/APs; feeds location (E)
LLDP-MED protocols lldp-med yes 🟢 Zero-touch phone: voice-VLAN + PoE + DSCP
MAC limiting / allowed-MAC interface-mac-limit yes 🟢 Cap MACs/port; block MAC-flood DoS
Persistent (sticky) MAC persistent-learning yes 🟢 Pin known phone MAC; block rogue swap
MAC move / notification mac-notification, mac-move-limit yes 🟢 Alert when a fixed emergency phone is unplugged/moved
MVRP (802.1ak) protocols mvrp yes 🟢 Dynamic VLAN registration on trunks
IRB / RVI interfaces irb yes 🟢 Inter-VLAN gateway for voice/data
Jumbo / flow-control / EEE interfaces … mtu/flow-control/eee yes 🟢 Tuning knobs (not needed for RTP)
GVRP — no (ELS→MVRP) ⛔ Use MVRP

A2 · Layer 3 / routing

Feature Config family On EX2300-C? Air-gap Emergency relevance
Static routes (v4/v6) routing-options static yes (base) 🟢 Simplest, most robust for air-gap
Routing policy policy-options yes 🟢 Redistribution / filtering
OSPFv2/v3 protocols ospf(3) yes (EFL) 🟢 Campus IGP if multi-hop L3
RIP / RIPng protocols rip(ng) yes (RIPng=EFL) 🟢 Tiny dynamic routing
DHCP server (local) system services dhcp-local-server yes 🟢 Address phones with no external DHCP
DHCP relay (v4/v6) forwarding-options dhcp-relay yes 🟢 Relay to a central pool
DHCP snooping forwarding-options … dhcp-security yes 🟢 Block rogue DHCP that misdirects phones
ARP static/proxy/gratuitous (1500) interfaces … arp yes 🟢 Pin the PBX gateway ARP
VRRP irb … vrrp-group yes (EFL) 🟢 Gateway redundancy (slow timers on this box)
Filter-based forwarding (PBR) firewall … then routing-instance yes 🟢 Policy-route emergency traffic
BFD (slow timers >3 s) protocols bfd limited (EFL) 🟢 Coarse L3 liveness
MPLS / EVPN-VXLAN / L2-L3VPN — no ⛔ Hard limit — not needed
Scale: 512 prefixes / 4096 host / 1500 ARP — capped 🟢 Fine for one flat campus

A3 · Virtual Chassis (HA stacking)

Feature Config family On EX2300-C? Air-gap Emergency relevance
Virtual Chassis (≤4 members) virtual-chassis yes 🟢 Two switches = one logical unit
VCP over SFP+ request virtual-chassis vc-port set yes 🟢 The uplink pair becomes the stack link
Mastership priority / preprovision virtual-chassis member … yes 🟢 Deterministic master
Split/merge detection no-split-detection (2-member) yes 🟢 Avoid dual-master lockout
Cross-member LAG interfaces aeX yes 🟢 Uplink survives a whole member loss
GRES chassis redundancy graceful-switchover yes (VC) 🟢 Master failover without dropping calls
NSR routing-options nonstop-routing yes (VC) 🟢 Preserve routing/VRRP state on switchover
NSSU request system software nonstop-upgrade yes (VC) 🟢 Upgrade the stack with minimal call disruption
Single-chassis ISSU — no ⛔ Standalone reloads on upgrade — plan a window

A4 · PoE (124 W budget)

Feature Config family On EX2300-C-12P? Air-gap Emergency relevance
802.3af / 802.3at (all 12 ports) poe interface yes 🟢 Power phones + APs (AP32 wants PoE+ 19.5 W)
Per-port enable/disable poe interface … disable yes 🟢 Kill power to rogue/unused ports (+ self-heal)
Per-port priority poe interface … priority high yes 🟢 Emergency phones/APs win contention
Max-power / class / guard-band poe … maximum-power / management class / guard-band yes 🟢 Budget-plan the 124 W; reserve headroom
LLDP-MED PoE negotiation lldp-med + poe yes 🟢 Fractional-watt = more devices per budget
Perpetual/Fast PoE (power thru reboot) — no ⛔ Phones lose power during a switch reboot — note for UPS

A5 · CoS / QoS (8 queues)

Feature Config family On EX2300-C? Air-gap Emergency relevance
8 egress queues/port class-of-service yes 🟢 Dedicated EF queue for RTP
BA classifier (DSCP/802.1p) class-of-service classifiers yes 🟢 Trust phone EF(46)/CS3
MF classifier (firewall-based) firewall … then forwarding-class yes 🟢 Classify RTP by UDP port when unmarked
Forwarding classes / schedulers / maps class-of-service … yes 🟢 Map voice→strict-priority
Strict-priority + SDWRR scheduler priority strict-high yes 🟢 RTP never queues behind data
Rewrite rules class-of-service rewrite-rules yes 🟢 Re-mark toward core/PBX
WRED / tail-drop class-of-service drop-profiles yes 🟢 Protect voice queue under congestion
Policer / rate-limit firewall policer yes 🟢 Cap non-voice / storm sources
Shaping scheduler shaping-rate yes 🟢 Smooth egress to a constrained uplink

A6 · Port / access security

Feature Config family On EX2300-C? Air-gap Emergency relevance
802.1X single/multiple/multiple-secure protocols dot1x … supplicant yes 🟠 Auth phone/PC per port (needs LAN RADIUS)
MAC-RADIUS dot1x … mac-radius yes 🟠 Auth phones that can't do 802.1X
Dynamic VLAN (RADIUS VSA) RADIUS → vlan yes 🟠 Push voice VLAN from RADIUS
server-fail / server-reject / guest VLAN dot1x … server-fail vlan yes 🟢 Keep phones usable if RADIUS is down — key for 111
Static MAC bypass / whitelist authentication-whitelist yes 🟢 Emergency phones never blocked by auth
Captive portal (on-prem) services captive-portal yes 🟠 Guest/unauth redirect
DHCP snooping dhcp-security yes 🟢 Block rogue DHCP
Dynamic ARP Inspection … arp-inspection yes 🟢 Stop ARP-spoof of the VIP/PBX (protects failover)
IP Source Guard … ip-source-guard yes 🟢 Drop spoofed src IP/MAC on phone ports
IPv6 RA-Guard / ND-inspection … ipv6-ra-guard yes 🟢 Block rogue IPv6 router/ND
Storm control (on by default) storm-control-profiles yes 🟢 Cap broadcast storms that starve RTP
Root guard / BPDU block / loop protect protocols rstp … yes 🟢 Keep STP root off edge; kill loops
Control-plane DoS protection system ddos-protection (basic) limited 🟢 Protect the RE/CPU during a flood
MACsec (802.1AE) security macsec limited (uplink/release-dep.) 🟢 Encrypt switch-to-switch if riser is untrusted
Firewall filters L2–L4 (2000 ACE) firewall family … yes 🟢 Restrict who reaches SIP/PBX

A7 · Multicast (paging!)

Feature Config family On EX2300-C? Air-gap Emergency relevance
IGMP snooping (v1/v2/v3, 2000) protocols igmp-snooping yes 🟢 Contain multicast paging / MoH to subscribers
IGMP querier / routing protocols igmp yes (EFL) 🟢 On-box querier for paging groups
PIM (SM/SSM/DM) protocols pim yes (EFL) 🟢 Routed overhead paging across VLANs (700s zones)
MLD / MLD-snooping protocols mld(-snooping) yes (MLD=EFL) 🟢 IPv6 multicast

A8 · Monitoring / telemetry

Feature Config family On EX2300-C? Air-gap Emergency relevance
SNMP v2c/v3 (+ traps/informs) snmp, snmp v3 yes 🟠 Poll PoE/port/CPU/temp from the Console
RMON alarms/events + health-monitor snmp rmon, snmp health-monitor yes 🟢 Switch self-watches thresholds → trap on breach
sFlow v5 (4 collectors, 6343) protocols sflow yes 🟠 Top-talkers on the voice VLAN → Console
Port mirroring / analyzer (1 active) forwarding-options analyzer yes 🟢 Tap SIP/RTP to a local capture/IDS
RSPAN / ERSPAN analyzer … output vlan/ip yes 🟢 Mirror to a remote sensor
Syslog (RFC 5424 structured) system syslog yes 🟠 Network events beside call events
CFM / LFM (Ethernet OAM) protocols oam ethernet … yes 🟢 Continuity/loopback on the PBX uplink
RPM probes (ICMP/TCP/UDP/HTTP) services rpm yes (EFL) 🟢 Switch actively probes the PBX; breach→trap
JTI native-UDP + gRPC sensors (limited) services analytics / gRPC yes (20.2R1, limited) 🟠 Stream port/chassis stats to a LAN collector
gNMI OpenConfig gNMI no (only EX4650) ⛔ Use JTI-gRPC/UDP or SNMP instead
Cable diag (TDR) / optical DOM diagnostics tdr yes 🟢 Detect a failing cable to a phone

A9 · HA / resilience & A10 · automation & A11 · services

See Part D for the full automation/telemetry surface (NETCONF, scripts, ZTP, event-options, RPM→trap) shared across EX+SRX. EX-specific resilience: UFD (switch-options uplink-failure-detection — down access ports when the uplink dies so phones re-home), 50 rollbacks, dual boot volumes, rescue config. Services: NTP, DNS, config archival, FTP/TFTP/SCP — all 🟢.

A12 · EX hard limits (flag & skip)

MPLS/EVPN-VXLAN/OpenFlow, single-chassis ISSU, gNMI, perpetual/fast-PoE, scaled BGP, BFD fast timers (<1 s), full DDoS-policer suite, MACsec on access ports — not on EX2300-C. None are needed for a single flat campus.


Part B — SRX300/320 (the firewall / router)

Runs the full Junos "security" image — nearly every branch feature is present. The real gates are (1) subscription/cloud feeds (dead weight air-gapped) and (2) chassis-cluster HA (needs a 2nd unit). #1 change: set security alg sip disable (SIP ALG is ON by default and breaks Asterisk).

B1 · Zones & policies

Feature Config family On SRX300/320? Air-gap Emergency relevance
Security zones (+ host-inbound-traffic) security zones security-zone yes 🟢 Segment phones/PBX/Wi-Fi/mgmt; permit only SIP/RTP/DHCP/NTP to the SRX
Zone / global stateful policies security policies from-zone…/global yes 🟢 Allow phone↔PBX, deny lateral movement
Address book / sets security address-book yes 🟢 Named phone subnets, PBX host, ERT desks
Application objects/sets applications application yes 🟢 Define SIP 5060 / RTP 10000-10019
Policy scheduler (time-of-day) schedulers yes 🟢 Time-box admin access; 111 path stays 24/7
Policy count / log (init/close) policy … then log/count yes 🟠 Audit trail of call signaling
Unified L7 policy (dynamic-application) policies … match dynamic-application yes 🔴 (app-DB stale) L7 SIP control — DB won't update offline
Integrated user firewall (source-identity) policies … match source-identity yes 🟠 Per-user rules with local auth

B2 · Screens (DoS/attack prevention) — all 🟢, all supported

security screen ids-option → apply per-zone. All run fully offline (local logic, no feed): ICMP flood/fragment/large/ping-death/sweep, IP bad-option/block-frag/source-route/spoofing/ teardrop/unknown-protocol/IPv6-ext-header, TCP SYN-flood/SYN-ACK-ACK/SYN-FIN/land/winnuke/ port-scan/sweep, UDP flood (guard RTP/SIP-UDP), UDP scan/sweep, session-limit source/dest-IP based, and alarm-without-drop (tune thresholds without dropping live 111 calls). This is a large, entirely-offline hardening surface — turn it on.

B3 · ALGs

security alg. Disable SIP ALG (set security alg sip disable) — the single most important change. Also present (leave default or disable per need): DNS, FTP, H.323, MGCP, MS-RPC, Sun-RPC, PPTP, RTSP, SCCP, TALK, TFTP (keep if phones TFTP-provision), RSH, SQL, IKE-ESP, TWAMP. All 🟢.

B4 · NAT (prefer none for internal SIP)

Source / destination / static / persistent NAT, proxy-ARP / proxy-NDP, NAT64/46, hairpinning — all security nat …, all 🟢. On a flat LAN you usually want no NAT in the SIP path (preserve headers → no ALG dependency); NAT rows are for multi-subnet/edge cases.

B5 · Threat prevention — mostly ⛔/🔴 offline (know the ceiling)

Feature Config family On SRX300/320? Air-gap Note
IDP/IPS inline engine security idp yes 🟢 (engine) Runs; bundled signatures go stale
IDP daily signature feed request security idp security-package yes 🔴 No feed reachable offline
Custom IDP attack objects security idp custom-attack yes 🟢 Write your own SIP/toll-fraud signatures offline
UTM antivirus / antispam / enhanced-web-filter security utm feature-profile … license 🔴 Feed/cloud — unusable offline
UTM local web-filter / content-filter utm … juniper-local / content-filtering yes 🟢 Allow/block URLs + file types from a local list
AppID engine services application-identification yes 🔴 (DB stale) Bundled sigs only
Custom AppID signatures application-identification application (custom) yes 🟢 Define your PBX's SIP app locally
AppTrack / AppFW / AppQoS security application-tracking / policy / class-of-service application-traffic-control yes 🟢 Log & prioritise the SIP app (not just port)
ATP Cloud / SecIntel feeds services advanced-anti-malware, security intelligence enroll 🔴 Cloud — N/A air-gapped

B6 · Flow, routing, L2, DHCP, VPN, CoS, HA

  • Flow/sessions (security flow): flow-based (default), packet-based, selective stateless, TCP session checks, TCP MSS clamp, aggressive aging, session logging, flow traceoptions/pcap — all 🟢. Watch live 111 sessions; root-cause one-way audio.
  • Routing (protocols, routing-instances): static/OSPF/RIP/BGP/IS-IS, VRF/virtual-router (isolate a voice VRF), VRRP, PBR/APBR, ECMP, IRB, IGMP/PIM, BFD, GRE/IP-IP tunnels — all 🟢.
  • Integrated switching / transparent mode (ethernet-switching, L2 transparent): VLANs, trunk/access, LAG, transparent (drop-in) firewall, secure-wire, RSTP/MSTP/VSTP, LLDP-MED, DHCP-snooping/DAI, 802.1X — 🟢. Transparent mode = insert the SRX without re-IP-ing phones/PBX.
  • DHCP (dhcp-local-server / dhcp-relay): server, relay, reservations, and provisioning options 66/43/120/125/150 + option 42 (NTP) — 🟢. Hand phones their SIP server + NTP automatically.
  • VPN (security ike/ipsec): route/policy IPsec, IKEv1/2, PSK or local-CA certs, AutoVPN, ADVPN, DPD/VPN-monitor, CoS-based IPsec (EF preserved), Secure-Connect remote-access (local auth) — all 🟢 over a private link (no Internet needed). For a van / building-to-building voice tunnel.
  • CoS: BA/MF classifiers, EF forwarding-class, strict-high scheduler, rewrite, shaping, 2-/3-color policers, RED, AppQoS — 🟢. Mirror the switch's EF marking end-to-end.
  • HA — chassis cluster (chassis cluster): active/passive, redundancy groups, reth interfaces, interface/IP-monitor failover, cluster ISSU — ⛔ needs a 2nd identical SRX. Single-box resilience still comes from VRRP, graceful-restart, snapshot/rescue, commit-confirmed.

B7 · SRX monitoring & services

Syslog (stream mode → LAN collector, or event mode), SNMP v2c/v3 + traps + RMON, J-Flow v5/v9 & inline IPFIX (20.1R1+; SRX has no sFlow — use J-Flow), RPM + TWAMP client/server (18.1R1+), packet-capture, IP-monitoring/service-tracking, Ethernet OAM, port-mirroring — all 🟢/🟠. Services: NTP server (serve time to the whole air-gapped campus), DNS proxy (split/ conditional), J-Web, SSH, local/RADIUS/TACACS+ admin auth, access profiles/captive-portal, PoE on SRX320-POE, config archival to a LAN server. Control-plane hardening: per-zone host-inbound-traffic, lo0 RE-protect filter, policers, connection-limits, dedicated mgmt-instance/fxp0, unicast RPF (anti-spoof). All 🟢.


Part C — Mist AP32 (the Wi-Fi)

Governing facts: data-plane is always local (softphone→PBX never touches the cloud, so voice works air-gapped); AP Config Persistence must be enabled on the bench before the air-gap; management/visibility/config-change all need cloud (frozen once offline). Grades: 🟡 persisted = authored in Mist once, runs offline; 🟢 = autonomous on the AP; 🔴 = needs live cloud.

C1 · Radio / RF (Wi-Fi 6, 2.4+5 GHz, no 6 GHz)

Feature Mechanism Air-gap Emergency relevance
802.11ax: OFDMA, MU-MIMO, 1024-QAM, TWT, BSS-color on-chip 🟢 Capacity/latency headroom for concurrent callers
5 GHz 4×4 + 2.4 GHz 2×2 concurrent two client radios 🟢 Dual-band coverage
Dedicated 3rd scanning radio always-on sensor 🟢 (reporting 🔴) 24×7 rogue/interference scan without stealing call airtime
Static channel/power plan per-radio, pushed 🟡 Lock a clean non-DFS voice channel plan (see below)
Local (event-driven) RRM + DFS backoff on-AP 🟢 AP still reacts to radar/interference offline
Global RRM (overnight ML) cloud 🔴 No overnight re-optimisation offline → pre-plan channels
Band steering / min-RSSI geofence per-WLAN 🟡 Push handsets to 5 GHz; reject weak far clients
Airtime fairness / min-rate (kill low legacy rates) per-WLAN 🟡 Protect voice airtime in a crowd (muster point)
Multiple SSIDs · per-SSID VLAN · VLAN pool WLAN→VLAN 🟡 Voice SSID isolated from data/guest
Dynamic VLAN (RADIUS) 802.1X VSA 🔴 (unless local RADIUS) Avoid for voice offline

C2 · QoS / voice

WMM (AC_VO/VI/BE/BK) 🟢 core air-prioritisation; DSCP→WMM mapping 🟢 honours softphone EF(46) into AC_VO; Override-QoS 🟡 pins the whole voice SSID to AC_VO regardless of client marking; per-SSID/client/app rate-limit 🟡 throttle data so voice keeps headroom. Note: the AP re-marks upstream DSCP from the AC — verify the switch/PBX trust boundary. No hard call-admission-control (size cells manually).

C3 · Roaming (moving caller)

802.11r (FT) 🟡 sub-50 ms roam keeps a walking 111 call's RTP alive · 802.11k/v 🟢 default · OKC 🟡 for Android clients lacking .11r · local PMK caching 🟢 fast re-assoc with no cloud. Roaming is entirely client-driven + AP-assisted — no cloud in the roam path.

C4 · Security / auth

Feature Mechanism Air-gap Emergency relevance
WPA2-Personal (PSK) AP-local 🟡 Simplest robust voice-SSID choice
WPA3-Personal (SAE) / transition AP-local 🟡 Stronger PSK, handshake is AP-local
Enhanced Open / OWE AP-local 🟡 Encrypted open SSID (no portal)
MPSK/PPSK — local lookup (≤5000 keys) on-AP cache 🟡 Per-device Wi-Fi keys with no RADIUS, works offline
MPSK cloud lookup (>5000) cloud per-join 🔴 Avoid — new joins fail offline
802.1X/EAP · MAC-auth AP→RADIUS 🟠 (local RADIUS) / 🔴 Only with an on-prem RADIUS
Guest/captive portal (Mist-hosted or external) cloud 🔴 Don't use for emergency SSID; portal-bypass-on-unreachable 🟢 as a safety valve
Rogue/honeypot/WIDS detection 3rd radio 🟢 detect / 🔴 alert Detects an evil-twin "upes-voice" locally; alerts need cloud
WIPS containment cloud/Marvis 🔴 No auto-containment offline
Client isolation (off/same-AP/same-subnet) per-WLAN 🟡 Isolate handsets; allow only PBX/gateway
WxLAN L3 access policy label allow/deny on AP 🟡 Restrict voice VLAN to PBX/SIP only, on the AP
ARP / broadcast-multicast filtering per-WLAN 🟡 Protect voice airtime — but keep mDNS (project uses upes-ecs.local)
Banned-client blocklist list snapshot 🟡 Enforced offline (can't update list offline)

C5 · NAC / Access-Assurance, C6 · forwarding, C7 · mesh

  • Access Assurance (cloud RADIUS/NAC) 🔴 — unusable on a permanent air-gap unless you add a Mist Edge appliance (Site Survivability: cached clients + local RadSec) ⛔/🟡. For this deployment, use local PSK/WPA3-Personal or MPSK-Local instead.
  • Forwarding: local bridging (SSID→VLAN on the AP's trunk) 🟢 is the correct model; Mist-Edge L2TPv3 tunnelling ⛔ (adds a dependency — skip for voice).
  • Wireless mesh 🟡→🟢: base/relay, auto-failover, mesh-groups — the "corner repeaters" for the van/courtyard; cable-commission each mesh AP on the bench first, then it runs offline. Keep ≤4 relays for voice latency.

C8 · Location / BLE — mostly 🔴 (honest)

x/y location engine, vBLE virtual beacons, wayfinding/SDK, BLE asset tags, proximity, zones/ occupancy — all cloud 🔴 (and AP32 has an omnidirectional BLE antenna, not the directional array of AP43/45 → lower accuracy anyway). The one offline "geofence" is per-WLAN min-RSSI 🟡. Offline substitute for "locate the caller" = the switch-port method in Part E.

C9 · Marvis / AIOps & C10 · Mist-managed EX & C11 · API

  • Marvis / SLE / anomaly / dynamic-PCAP — all 🔴. No AI troubleshooting, dashboards, or auto-PCAP offline.
  • Mist-managed EX: Junos runs locally so forwarding/PoE/VLANs/VC persist 🟡→🟢, but config changes need cloud 🔴 — so if you let Mist manage the EX, you can't edit the switch offline. Recommendation: manage the EX by NETCONF/CLI (self-hosted), not Mist, precisely so it stays editable air-gapped.
  • Mist cloud dashboard / REST API / webhooks / firmware — all 🔴, commissioning/Option-B only.

C12 · Power / onboarding

PoE+ (19.5 W) = full function 🟢; 802.3af = reduced (drops 5 GHz to 2×2) 🟢 — give APs PoE+. Claim/adopt/ZTP-config/firmware = one-time cloud 🔴→ then persisted 🟡. Static IP 🟡, BLE/console local onboarding 🟢, reboot survivability with persistence 🟡.


Part D — Automation, telemetry & integration glue (cross-device)

The layer that turns "network gear" into "part of the emergency app." Almost all 🟢 — it's on-box Junos + on-prem collectors (the VM/Jetson runs the receivers). This is where the impactful integration lives.

D1 · On-box scripting & reaction

Capability Junos mechanism EX / SRX Air-gap Integration with PBX + Console
Op scripts (SLAX/Python) system scripts op both 🟢 One-command diagnostics (voice-path check, PoE audit)
Commit scripts system scripts commit both 🟢 Guardrails — refuse a commit that re-enables SIP ALG or drops NTP
Event scripts + event-options event-options policy, event-script both 🟢 React to link/PoE/LLDP/RPM/config events → run a local action or hit the Console
SNMP scripts system scripts snmp both 🟢 Custom OIDs for voice health
On-box Python 3 + requests set … scripts language python3 (19.4R1+) both 🟢 Script does requests.post() — no external agent needed
Reaction hook → local HTTP event-script then runs a Python requests.post() to the Console /exec (or Asterisk ARI/AGI) both 🟢 Network event → PBX action (page ERT, start followup)

D2 · Programmatic config / management

Capability Junos mechanism EX / SRX Air-gap Integration
NETCONF over SSH (TCP 830) system services netconf ssh both 🟢 The Console/collector reads state & pushes config
On-box REST API (HTTP 3000 / HTTPS 3443) system services rest; lock control allowed-sources to the Console IP both 🟢 PowerShell Invoke-RestMethod http://<sw>:3000/rpc/get-… — no NETCONF client needed
PyEZ (junos-eznc) Tables/Views NETCONF client on the PBX host both 🟢 Structured get-poe/lldp/arp/ethernet-switching → JSON for the board
Ansible (junos collection) NETCONF/SSH both 🟢 Config-as-code from an air-gapped control node
apply-groups / configuration groups groups, apply-groups both 🟢 Template port/PoE/CoS/zone config
commit confirmed / commit at / check commit confirmed N both 🟢 Auto-rollback if a change breaks 111
Config archival (transfer-on-commit) system archival → LAN SCP both 🟢 Auto-back-up switch/SRX config into the nightly backup
Rescue config / 50 rollbacks rollback, rescue both 🟢 Instant revert to known-good
ZTP (DHCP opt 43/66/150 → LAN file server) ZTP both 🟢 Swap a dead switch → self-configures from the VM, no Internet

D3 · Telemetry to a local collector (the Console's data feed)

Capability Junos mechanism EX / SRX Air-gap Integration
SNMP v2c/v3 (jnxBoxAnatomy, IF-MIB, POWER-ETHERNET-MIB, ENTITY-MIB) snmp both 🟠 Poll PoE watts/budget, port up/down, PSU/temp → health tiles
RMON + health-monitor (self-thresholding) snmp rmon, snmp health-monitor both 🟢 One line → box watches CPU/mem/temp/errors, traps on breach
SNMP traps/informs → PBX-host listener snmp trap-group both 🟠 link-down / PoE / RMON breach → Asterisk originate/alert
sFlow v5 (EX) / J-Flow v5-9 & IPFIX (SRX) protocols sflow / forwarding-options sampling EX / SRX 🟠 Top-talkers + flow audit on the voice VLAN, no cloud SIEM
Syslog RFC 5424 structured → LAN system syslog host both 🟠 Typed network events beside call events; match → trigger
Security-log stream mode (SRX) security log mode stream SRX 🟠 High-volume session/screen/IDP logs to the LAN
RPM probes + thresholds → syslog/trap services rpm both (EX=EFL) 🟢 Box actively probes the PBX/SIP; breach → trap → followup
TWAMP client/server services rpm twamp SRX (EX unverified) 🟢 Standards-based voice-path delay/jitter/loss SLA
RPM/RMON results via MIB DISMAN-PING-MIB / jnxPing both 🟠 Console plots RTT/jitter history, no cloud APM
JTI native-UDP + gRPC (limited sensors) services analytics / gRPC EX2300 only (20.2R1) 🟠 Real-time port/chassis/LLDP/ARP streams to a LAN collector
gNMI OpenConfig gNMI neither (EX4650+/SRX1500+) ⛔ Not on this gear — use JTI/SNMP
Port mirroring / analyzer forwarding-options analyzer (EX 1 active) / SRX pcap both 🟢 On-demand SIP/RTP capture to the PBX host / IDS

D4 · Time & name services (air-gap essentials)

NTP (system ntp, SRX as master) 🟢 — no Internet clock, so a local NTP master keeps call records/fail2ban/logs honest; DNS proxy / static-host-mapping 🟢 — resolve upes-ecs.local and PBX/RADIUS names locally.


Part E — New emergency-specific integrations this research surfaced

Beyond the plan's Tier-3 ideas, these fall out of the full feature scan and are all offline:

  1. Overhead / multicast paging done on the network — the system already has paging (700s). Carry it as IP multicast with IGMP-snooping (contain it) + IGMP querier/PIM (route it across zones). Paging audio reaches only subscribed speakers, doesn't flood the voice VLAN. (EX A7; PIM/IGMP = EFL.)
  2. Fixed-phone tamper/loss alert — MAC-move/MAC-notification + PoE-draw watch (POWER-ETHERNET-MIB): if a fixed emergency phone (e.g. 4301 Main Gate) is unplugged or stops drawing PoE, the switch traps → Console flags "Main Gate phone offline" against that extension. A silent dead emergency phone becomes a visible alarm.
  3. The network probes the PBX and drives the follow-up workflow — RPM (ICMP/UDP) from the EX/SRX to the PBX/SIP, with thresholds → SNMP trap / event-script. On loss/RTT breach the box hits the Console /exec (existing followup action) or pages the ERT desk — the network watches the emergency service and escalates itself.
  4. Commit-script guardrails for the emergency invariants — a commit script that rejects any config which re-enables SIP ALG, removes the NTP master, or deletes the voice EF scheduler. The rules that keep 111 working become un-break-able by a careless change.
  5. Auto-backup of network config into the existing nightly backup — system archival transfer-on-commit (or a NETCONF get-config in backup/pull-configs.sh) drops EX+SRX config into the VM's nightly set, so a full rebuild restores the network too.
  6. Per-device Wi-Fi keys with no server (MPSK-Local) — up to ~5000 per-device pre-shared keys cached on the AP, works fully offline: every responder handset / fixed device gets its own revocable Wi-Fi key without standing up RADIUS.
  7. Transparent-mode SRX drop-in — insert the SRX's screens/policies in front of the PBX without re-IP-ing anything (bump-in-the-wire), so hardening doesn't disturb a working flat design.
  8. UFD + RTG for phone re-homing — if the PBX-side uplink fails, Uplink-Failure-Detection downs the affected access ports so Wi-Fi/roaming phones immediately re-home via the other AP/path; RTG gives sub-second uplink failover for signaling.
  9. Custom IDP + custom AppID for SIP abuse — write offline signatures for SIP scanning / REGISTER floods / toll-fraud patterns; a network-layer complement to the PBX's fail2ban.
  10. DHCP as the phone auto-provisioner — options 120/125/43/66/150 hand phones the SIP server, and option 42 the NTP server — so a factory phone self-points at the PBX and the campus clock with zero manual entry.

If you want "a lot of Juniper," here's the consolidated on-profile — every item is 🟢/🟡 and adds real value, grouped by device. (This is the union of the plan's tiers + the gems above.)

EX2300-C VC (both members): Virtual Chassis + GRES/NSR + NSSU · voice/mgmt/guest VLANs + IRB gateway + VRRP · LLDP-MED voice auto-assign · CoS (EF strict-priority + rewrite + WRED) · PoE priority + guard-band · RSTP-edge + BPDU/root-guard + storm-control + MAC-limit/persistent-MAC + MAC-move alert · DHCP-snooping + DAI + IP-source-guard · 802.1X/MAC-RADIUS (server-fail→voice, static-bypass for emergency phones) · IGMP-snooping (+PIM/IGMP for paging) · UFD + RTG + LAG to PBX · SNMP v3 + RMON/health-monitor + RPM→trap + sFlow + structured syslog + (optional) JTI · NETCONF + op/commit/event scripts + apply-groups + commit-confirmed + config-archival + ZTP · NTP client.

SRX300/320: zones (VOICE/MGMT/GUEST/UNTRUST) + host-inbound-traffic · LAN-only voice policy · security alg sip disable · full screen suite (UDP/SYN flood, spoofing, scans, session limits, alarm-without-drop) · DHCP server + provisioning options 120/125/66/42 · NTP master · DNS proxy · CoS EF mirror · custom IDP + custom AppID + AppFW/AppTrack/AppQoS · UTM local web/content filter · unicast-RPF + lo0 RE-protect filter + connection-limits · J-Flow/IPFIX + stream syslog + SNMP + RPM/TWAMP · NETCONF + scripts + commit-confirmed + rescue · (later) IPsec for a van link.

AP32 (persist on the bench): Config Persistence ON · voice SSID (WPA3-Personal or MPSK-Local, isolation on, WxLAN → PBX/SIP only, keep mDNS) + guest SSID (isolated→GUEST VLAN) · WMM + DSCP→WMM + Override-QoS(AC_VO) · 802.11r/k/v + OKC + local PMK · band-steering + min-RSSI + airtime/min-rate · static non-DFS channel plan + local RRM · 3rd-radio WIDS (detect) · mesh for van/corner coverage · static IP · PoE+ · firmware pinned.

On the VM/Jetson (the collectors that make it offline-capable): rsyslog:514, SNMP poller + trap listener:162, sFlow/J-Flow/IPFIX collector, NETCONF/PyEZ pollers (net_health, caller_locate), FreeRADIUS (for 802.1X/MAC-RADIUS), NTP (fallback), a ZTP file/DHCP server, and the Console /network, /locate, /exec:evac-network-* routes.


Part G — Skip list, hard limits & unlock-upgrades

Deliberately skip on a permanent air-gap (dead weight or unavailable): - Mist cloud runtime: Marvis, SLE, dashboards, REST API, webhooks, dynamic-PCAP, Location/vBLE/ wayfinding/asset-tracking, global RRM, firmware push, any AP/switch config change, Mist-hosted captive portal, cloud-MPSK, Access-Assurance cloud RADIUS. (All 🔴 — commissioning/Option-B only.) - SRX subscription/cloud: ATP Cloud, SecIntel, UTM antivirus/antispam/enhanced-web-filter, IDP & AppID signature feeds, unified-policy app-DB freshness. (Engines run; feeds don't update.) - Needs hardware you don't have: SRX chassis-cluster HA (⛔ 2nd SRX), Mist Access-Assurance offline (⛔ Mist Edge appliance). - Not on this silicon: EX MPLS/EVPN-VXLAN/OpenFlow/gNMI/single-chassis-ISSU/perpetual-PoE; SRX/EX gNMI; long-range point-to-point Wi-Fi (AP32 is indoor omni, not a PtP bridge — the Bidholi↔Kandoli rooftop link needs different gear).

"Add one thing" upgrades that unlock a lot: | Add | Unlocks | Grade after | |---|---|---| | A 2nd SRX320 (identical Junos) | Firewall chassis-cluster HA (active/passive, reth, sub-second failover) — removes the single-SRX SPOF | 🟢 | | A brief, firewalled maintenance uplink (Option B) | Marvis, Location/BLE, webhooks→Console, firmware & signature updates — during a window; voice stays LAN-only | 🔴→available | | A Mist Edge appliance | On-prem Access-Assurance Site Survivability (offline 802.1X with cached clients) | 🟡 | | Directional/outdoor radios | The Bidholi↔Kandoli campus bridge AP32 can't do | n/a→🟢 |


Corrections to the Integration Plan

Research updated one claim in Docs/Juniper-Integration-Plan.md: the EX2300 does support limited JTI streaming telemetry (gRPC dial-in + native-UDP sensors, Junos 20.2R1+; PFE CPU/mem/filter stats, physical-interface traffic, RE LACP/chassis-env/LLDP/ARP) — it only lacks gNMI. SRX300/320 have no streaming telemetry at all (lowest is SRX1500). So the "no streaming telemetry on EX2300" note there should read "limited JTI on EX2300, no gNMI; none on SRX300 — use SNMP/RMON/RPM/J-Flow/syslog." Everything else in the plan stands.


Volume II of the UPES-ECS Juniper docs. Compiled from a full feature-surface scan of the exact hardware (1× SRX300/320, 2× EX2300-C-12P, 2× Mist AP32) for a fully air-gapped deployment. Every set/RPC is a sketch — validate syntax per Junos version + Feature Explorer; apply with commit confirmed; test 199 before 111.